Spray lock is a spray that is applied to concrete when it is being placed. It is therefore one of concrete protection products It is applied so that the floor concrete can resist the moisture that will come into contact with it. Here are some of the reasons as to why it is important to use spray lock.
Prevents Moisture-Related Problems
The spray lock reacts with the alkali to seal pores and capillaries that were affected by moisture. This happens in the capillaries and pore structures. When the reaction Is over, Calcium Silicate Hydrate is formed. This compound has been proven to give concrete the strength it needs. In addition to that, the spray lock reduces water migration levels to reasonable levels. That, therefore, offers protection of adhesives and the floor from failing due to high levels of moisture in the slab. Once it is installed, it becomes part of the concrete.
It Is A Superior Cure
The best way to cure concrete involves 28 days of water ponding. In this modern era where construction is on demand, and it happens every other day, no one has time to wait for 28 days. Spray lock offers an equivalent effect, and it is even better than the 28 days of water ponding. The best part is that within one hour, they can access the slab. Items like curing membranes, curing hardeners and curing agents are not needed. The spray lock, therefore, saves time and money.
It Prevents Spalling
When rust begins eating up the steel, pressure builds up and causes the chunks of the concrete to break away. Spalling has dangerous effects on the concrete, and the replacements will be happening often because the concrete will have shorter life spans. That will be expensive in the long run. The effects will not only hurt the pockets, but the resources that would have been conserved will be put to use on the regular and it is detrimental to the environment.
Protects Reinforcing Steel
For steel to corrode, water and oxygen are needed. The two make their way through the concrete via capillaries and pores. Spray lock permanently seals the pores and capillaries. It eliminates the channels that would allow the water and oxygen to enter in the concrete. That ends up preventing the damage.
Fast Track Construction
Fast track construction projects benefit from spray lock. Flooring can be installed in as little as two weeks from pouring. It is used in fast timelines as it gives the concrete strength.